Total # Of Inputs 40
Mic/Line Inputs 40 Line: 1/4″ Phone
40 Mic: 3-pin XLR
Stereo Line Inputs 4 Stereo: L/R 1/4″ Phone
In-Line Inputs/Returns No
AUX Sends 4 Aux Sends: Balanced XLR Male
AUX Returns No
Inserts 40 Line: TRS 1/4″ Phone
8 Group: TRS 1/4″ Phone
2 Stereo Out: TRS 1/4″ Phone
BUS (Group) Outputs 4 Group Outputs: 1/4″ Phone
2 Trk Master I/O Main Outputs: Left / Right / Mono (sub) Balanced 3-pin XLR
2Trk In: L/R RCA Phono
2Trk Out: L/R RCA Phono
ALT I/O No
Monitor Outputs Monitor Out: L/R 1/4″ Phone
EQ Section Hi Pass Slope: 12dB/Oct
Hi Pass Frequency: 80Hz
Treble Gain: +15 to -15dB
Treble Frequency: 12k
Hi Mid Gain: +15 to -15dB
Hi Mid Frequency: 400Hz to 8kHz
Hi Mid Bandwidth: 1 Oct. (Q=1.4)
Lo Mid Gain: +15 to -15dB
Lo Mid Frequency: 100Hz to 2kHz
Lo Mid Bandwidth: 1Oct. (Q=1.4)
Bass Gain: +15dB to -15dB
Bass Shelving Frequency: 80Hz
Solo/Mute Mute / PFL on all channels
Channel Level Control Faders
Trim/Gain Control Rotary Potentiometers
Phantom Power +48V Phantom Power (all mono channels)
Metering peak meters
Frequency Response 20Hz to 20kHz
Dynamic Range Not Specified By Manufacturer
Signal-to-Noise Ratio Summing Noise -90dBu
Total Harmonic Distortion (THD) Typ. 0.0007%
Power Supply External EPS 1200 External Power Supply
Dimensions (WxHxD) 61.78 x 9.15 x 30.76″ (1569 x 232.34 x 781.25mm)
Weight 143.3lbs (65kg)
Midas Sienna 400
Algemene informatie over de Midas Siena
Main features and specification for Midas Siena Analog Audio Console:
Offering six different frame sizes from 24 to 64 inputs, the Siena presents true audio performance and value in an affordable package for dual-purpose (monitor and front of house) live sound applications.
The mixing console is a semimodular construction in eight channel blocks. Its modest dimensions on the 40 input version is 9 inches high x 31 inches deep x 62 inches wide, and at a weight of 143 pounds, is very manageable in setting up.
Each Siena includes as standard 16 mix buss sends, with global master mono/stereo switching in pairs. With one stereo master output, one stereo solo output and separate mono solo output, its solo cueing system is very intuitive for monitor engineers.
At the top of the mono input module are switches for phantom power (48VDC), 15 dB pad, phase, and insert enable. The gain control for the microphone preamp gives continuous adjustment from +15 dB to +60 dB. The Siena microphone preamplifier can handle input levels up to +21 dB. This assures improved RF rejection and low noise performances similar to the Heritage series.
The equalization section features a four-band sweepable EQ with a separate I/O switch; an adjacent switch sends desired signals pre EQ to the auxiliary sends. It provides a range on each band of ±15 dB and a fixed Q of one octave in each bandwidth. Every mono input channel has a variable high pass filter (20 Hz – 400 Hz) with I/O switch for removing handling noise and unwanted low end in the input signal.
The Siena input module has 16 mix sends. Each mix has a separate gain control knob to adjust level from OFF to +6 dB. All 16 mix sends are globally switched mono/stereo in pairs. Its flexibility permits running 16 mono mixes and a stereo mix, or nine discrete stereo mixes, or any combination of mono or stereo mixes desired.
Above the long throw 100mm fader is a four-segment LED meter (18 dB, 0 dB, +12 dB, +18 dB). Completing the mono input module is a mute and solo switch with LED indicator that illuminates to depict when active. The Siena has five auto-mute busses that can be controlled from the center section of the console. Any input channels can be assigned to auto-mute groups 1 – 5 as desired.
The center section of the Midas Siena console contains fader and muting control for all outputs. All output modules have graduated LED bar graphs with 16 segments that provide good monitoring of output signals. All outputs are balanced with XLR connections on the back of the console. Direct outputs on every channel can be used for multitrack recording, or sending to a dedicated effects processor. All direct outputs are post fader as standard but can be modified via internal jumper to provide prefader, pre-EQ/post-mute, pre-EQ/pre-insert or post-EQ if desired.
All Siena consoles (except the Siena 240) come with two internal power supplies. In addition, a multipin connector is provided for interfacing an external linear backup power supply, which is a well thought out design feature to ensure reliability on the road. The power supply units are current-sharing, voltage sensing and auto switching, providing proper assurances that might be necessary to save a show.
Total # Of Inputs 40